SpeedBox 3.0 for TQ (HPR120S, FLYON) - Package: BOX, Qty: 1 pcs
PROPERTIES:
Maximum speed: Unlimited
Display shows: Actual values
Speed limit setting: Yes
Activation: By switching between two modes (→ ← → ←)
Compatible with: Motors TQ HPR 120S
Not compatible with: SpeedBox Connect
We do not recommend updating the software of the e-bike
More
Product code: SB3_TQ_1pcs_BOX Shipping and Payment
Key features
SpeedBox 3.0 is a third-generation tuning chip for e-bikes with a TQ HPR120S motor that lets you choose your own speed limit. It disables the speed limiter so you can enjoy riding at unlimited speed, while the display keeps showing real values such as maximum and average speed, daily mileage and range.
Tuning control
Activated by switching between two modes (→ ← → ←)
Real values on the display
The display keeps showing maximum and average speed, daily distance and range
Easy installation
Thanks to clear instructions including a video, anyone can handle the installation
Compatibility
Motors: TQ HPR120S
Not compatible with: SpeedBox Connect
Technical specifications
| Maximum speed | Unlimited |
|---|---|
| Display shows | Real values |
| Custom speed limit | Adjustable (up to 99 km/h) |
| Activation | By switching between two modes (→ ← → ←) |
| Minimum ride distance before installation | 10 km (new bike) |
Installation
Installing the device is easy and intuitive. Choose the option that suits you best – a video guide, a printed manual, or a detailed step-by-step picture guide.
Video guide
Detailed installation and tuning activation procedure for e-bikes with a TQ HPR120S motor
Printed manual
Inside the product package you will find a printed manual including a wiring diagram for connecting the chip to the motor
Step by step
The illustrated guide will walk you through the installation step by step — from removing the motor cover to the test ride. Each step is accompanied by photos and clear explanations.
User Manual →Tuning control
You activate the tuning via the e-bike's control unit. To activate or deactivate it, use the → ← → ← button sequence to switch between two assistance modes twice. The current speed limit will briefly appear on the display and the motor will support you up to this speed.
To deactivate the tuning, use the → ← → ← sequence again. The display will show a cadence of 25 rpm and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before the chip was installed.
Setting the maximum speed
You set the maximum assistance speed by switching the modes gradually: EXTREME → HIGH → MID → LOW → MID → HIGH → EXTREME. The current speed limit will then appear on the display. You change the limit by turning the rear wheel by about 180°. A cadence of 15 rpm on the display corresponds to a limit of 15 km/h, 20 rpm to 20 km/h, 25 rpm to 25 km/h, 30 rpm to 30 km/h, 99 rpm to 99 km/h, and so on.
The last displayed limit is saved after 5 seconds of inactivity.
Warning
- Rules for using derestricted e-bikes vary by country, so check local legislation before riding.
- SpeedBox is intended for off-road use only and you use it at your own risk.
- The manufacturer is not liable for damage caused by illegal or improper use.
- Installation may also void your e-bike warranty.
- For your safety, use appropriate protective gear and ride with maximum caution.
- We do not recommend updating the e-bike software.
| Bluetooth/ SpeedBox Connect | NO |
|---|